VELOSIT® WP 101
High Strength Cementitious Waterproofing Slurry
VELOSIT WP 101 is a cementitious waterproofing slurry for concrete and masonry. It is a good substrate for coatings and overlays. It is especially strong against negative side water pressure.
Typical applications:
- Waterproofing of basements and below grade parking structures
- Waterproofing of potable water structures
- Waterproofing of elevator pits
- Waterproofing against rising dampness in walls
- Negative side waterproofing underneath flexible waterproofing membranes
- Prime coat to fill blow holes, honeycombs and surface roughness
Properties:
- Minimal shrinkage/expansion under dry resp. wet curing conditions
- Hydrophobic
- Resists 130 m (400 ft.) water pressure acc. to EN 12390-8
- 45 min. working time and 12 MPa compressive strength after 4 hours
- Final strength of more than 50 MPa (7250 psi) after 28 days
- Open to foot traffic after 3-4 hours
- Ready for water pressure after 24 h
- Very good adhesion to concrete and masonry
- Water curing only under hot and dry conditions required for max. 4 hours
- No cracking if applied too thick
Downloads
Here you can find detailed information about the selected VELOSIT product.
Technical Data Sheet Environmental Product Declaration - EPD Safety Data Sheet License EMICODE Technical Drawing Basement waterproofing Technical Drawing Sewage tank Technical Drawing Corner waterproofing detail Test report use contact with drinking water Prospect Waterproofing Systems
-
By playing you accept the privacy policy of YouTube.
Learn more