High Performance Non-Shrink Grout For 6-50 mm

VELOSIT NG 511 is a cementitious non-shrink grout for concrete  substrates.It is used to fill large voids or underneath base plates of machinery or building columns up to 50 mm (2”) clearance.

Typical applications:

  • Repair of large surface defects on concrete
  • Filling of gaps between two concrete bodies
  • Grouting of machinery and construction columns
  • Application thickness from 6 mm (¼“) to 50 mm (2”)
  • Anchoring of starter bars and dowels


  • Minimal shrinkage
  • Slight volume increase in the plastic stage to ensure good bond to base plates
  • Excellent workability
  • Wide range of water addition allowing consistencies from plastic to fluid
  • Fiber reinforced
  • Advanced corrosion inhibitor technology
  • 60 min. working time and 12 MPa (1740 psi) compressive strength after 6 hours
  • Final strength of more than 70 MPa (10150 psi) after 28 days in fluid consistency
  • Open to foot traffic after 6 hours
  • Excellent adhesion to properly prepared concrete and steel
  • Minimal water penetration

Associations & Memberships:

back to top